Black Cherry Gelato Mylar Bags

Through store drop-off in many areas rather than kerbside collection. Mono-material polyethylene is the more recyclable option; mixed-material films generally are not. If recyclability is a stated claim, tell us and we will keep to a mono-material construction.

It depends on shelf life and what degrades the product — oxygen, moisture or light. A higher barrier costs more and is usually harder to recycle, so the right answer is the lowest barrier that holds your product for as long as it needs to.

Not currently, and it is better to be straight about it. Multi-layer laminates block best precisely because they combine materials, which is what makes them hard to recycle. Mono-material films are recyclable through store drop-off but give a shorter shelf life.

Both are standard options. A zip suits anything the customer opens repeatedly; a one-way valve is for products that off-gas, such as freshly roasted coffee, where a sealed bag would otherwise inflate.

Recycled grades are available across most of the substrates we run for pouches. Recycled content, kerbside recyclability and certified compostability are three different claims though, so tell us which one you intend to print.

A print-ready PDF or a vector file, with fonts outlined and any raster images at 300 dpi at final size. We supply the dieline to design onto, and prepress checks bleed, safe area and crease clearance before issuing a proof. The dieline we supply carries the crease positions, so keeping type clear of a crease is easier to solve at layout than at proof.

A flat 100 units on any format. Most pouches in this range are quoted from 100 units upward because unit cost falls sharply above that, but the minimum exists so you can validate a structure first.

3 to 5 business days after artwork approval, plus freight. Pouch runs with applied finishes can take longer because each finish is a separate pass, and we confirm a firm date in writing with the quote.

Prices start from $0.30 per piece for large-volume orders. For this format the biggest levers are quantity, print route, board grade and how many finishing passes are involved. We quote each element separately so you can see where the money is going. On this format the film structure and whether you need a zip or a valve move the price more than quantity does at small volumes.

Yes. We can send a plain unprinted sample so you can check the fit and structure, or a printed prototype for colour and finish. Sample costs are normally credited against the production order. A plain sample answers fit and structure; a printed one answers colour. On black cherry gelato mylar bags it is usually fit that is worth checking first.

Send the current specification or a physical sample and we will quote to match it rather than proposing an alternative you would then have to re-approve internally. A physical sample tells us more than a specification sheet — board caliper and coating are usually described loosely and measured exactly.

All 50 US states, the United Kingdom, Canada and Australia, on the same timeline everywhere: 3 to 5 business days of production after artwork approval, then 5 to 7 business days in transit. Every run is made to order and shipped directly to your address rather than pulled from stock, so you receive current production rather than whatever has been sitting in a warehouse. Freight is costed separately by weight, volume and destination. This format nests or lies flat, so a large quantity takes up far less freight volume than the finished pack suggests.