Min. 100 units · 3–5 days
26 made-to-order formats
The difference between a sticker that lasts three weeks and one that lasts three years is entirely in the face stock and the laminate, not in the printing.
Paper stickers are cheaper, print beautifully and fail quickly outdoors — they fade in weeks and lift at the edges as soon as they get damp. Vinyl costs more, survives weather and handling, and takes a UV laminate that extends it further.
Almost every disappointing sticker order we are asked about is a paper stock used where a vinyl one belonged. The printing was fine; the material was wrong for the environment.
Adhesive keys differently to glass, coated card, matte plastic, powder-coated metal and anything cold or damp. A general-purpose adhesive on a low-energy plastic will lift at the edges within days.
Application temperature matters too. Adhesive applied below room temperature never keys properly, and it is one of the few sticker faults that cannot be corrected afterwards.
Four combinations covering most orders.
| Use | Face stock | Finish |
|---|---|---|
| Indoor packaging seals, short life | Coated paper | None or gloss varnish |
| Product labels handled often | Vinyl | Matte or gloss laminate |
| Outdoor, vehicles, equipment | Vinyl | UV laminate |
| Windows and glass, viewed both sides | Clear vinyl | Gloss laminate |
The range
No format matches that. Try a shorter word, or describe what you need in a quote request.
Specification
Where the sticker lives. Anything outdoors or in a dishwasher needs UV-resistant vinyl with a laminate. Our guide to packaging board and film grades compares them on strength, print quality and cost.
Run length usually decides this. Digital wins on shorter quantities because there is no plate cost; beyond that, offset and flexo overtake it on price per unit.
Finishes are applied in the same production run. Each one adds a step, so we price them individually rather than bundling them into the base rate.
Most orders here come from retail and grocery, e-commerce and dtc, gifting and events brands.
Specification builder
Set what you know, leave the rest. Everything here travels with your request, so nothing gets retyped.
Drag to rotate
Recent work
The contexts that come up most, each with a different stock behind it.
Get a price
Send the product details and the quantity you have in mind. We reply with a specification and a written price, usually within one business day.
Prices start from $0.30 per piece for large-volume orders. Final pricing depends on size, material, printing, finishes, and quantity.
No obligation
Send us the product details and quantity. We reply with a specification and a written price, usually within one business day.
Answers
No. They fade within weeks and lift at the edges as soon as they get damp. Outdoor use needs vinyl with a UV laminate, which lasts considerably longer.
It matters more than most buyers expect. Adhesive keys differently to glass, coated card, matte plastic and powder-coated metal. Tell us the surface and the application temperature and we will match the adhesive.
Yes, within reason — very fine points and narrow necks tear during weeding and application. We will flag it if a shape is going to be fragile before we cut the die.
Die-cut goes through the backing so each sticker is separate. Kiss-cut cuts only the face material, leaving stickers on a backing sheet — better for sheets, sets and anything applied in sequence.
Yes, and for anything applied by machine or in volume at a bench, rolls are considerably faster to work with than sheets. Tell us the application method and we will supply accordingly.
Only with the right adhesive. General-purpose adhesive does not key below room temperature and will lift. If application happens cold, say so and we will specify a cold-apply adhesive.
Paper face stocks generally are; vinyl is not. If recyclability matters more than durability, a paper stock with a light varnish is the honest choice — but it will not last outdoors.
A flat 100 units on any format. Digital printing means short runs carry no plate cost, so small quantities are genuinely economical here.
Yes. On digital there is no plate cost per design, so a mixed run of several artworks is usually barely more expensive than one design at the same total quantity.
From $0.30 per piece at large volumes. Vinyl and laminate both add cost over paper, and the size and shape complexity affect how efficiently the sheet is used.
Related ranges
Next step
Send the product dimensions and the quantity you need. We come back with a specification, a lead time and a written price.