Candle Display Boxes

At the widest point, which is frequently not the base, and including the cap or pump. Send us the actual container if you can — a measurement from a drawing misses flex and applied label thickness, and both decide whether candle display boxes close cleanly.

More than most brands allow for. Ingredient copy and any warnings compete directly with the design, and adding them late usually forces a reflow. We block the area on the dieline before you commit design time.

Along a designed perforation, which is the hardest part of the structure to get right. Too weak and it fails in transit; too strong and store staff tear it badly. It is decided at dieline stage, and we recommend a sample before committing.

If you are supplying a grocery chain, almost certainly. Case dimensions, pallet pattern and barcode placement are usually published and non-negotiable. Send the requirement and we will design inward from it.

That is a structural calculation rather than a hope. Send the weight of a full facing and we will grade the board and add reinforcement where the load actually sits, which is usually the base and the front lip.

Recycled grades are available across most of the substrates we run for display boxes. Recycled content, kerbside recyclability and certified compostability are three different claims though, so tell us which one you intend to print.

A print-ready PDF or a vector file, with fonts outlined and any raster images at 300 dpi at final size. We supply the dieline to design onto, and prepress checks bleed, safe area and crease clearance before issuing a proof. The dieline we supply carries the crease positions, so keeping type clear of a crease is easier to solve at layout than at proof.

A flat 100 units on any format. Most display boxes in this range are quoted from 100 units upward because unit cost falls sharply above that, but the minimum exists so you can validate a structure first.

3 to 5 business days after artwork approval, plus freight. Display box runs with applied finishes can take longer because each finish is a separate pass, and we confirm a firm date in writing with the quote.

Prices start from $0.30 per piece for large-volume orders. For this format the biggest levers are quantity, print route, board grade and how many finishing passes are involved. We quote each element separately so you can see where the money is going. Finishing passes are the lever buyers most often underestimate: each one is a separate run through the line.

Yes. We can send a plain unprinted sample so you can check the fit and structure, or a printed prototype for colour and finish. Sample costs are normally credited against the production order. Ask for the printed prototype rather than the plain sample if the question is finish — soft-touch, foil and deboss all read differently in the hand than on a screen.

Send the current specification or a physical sample and we will quote to match it rather than proposing an alternative you would then have to re-approve internally. A physical sample tells us more than a specification sheet — board caliper and coating are usually described loosely and measured exactly.