Essential Oil Boxes

Not well — a 10 ml bottle in a 30 ml carton rattles and chips at the neck. The usual answer is two carton sizes sharing one board, one print system and one finish, so the range still reads as a range on shelf.

At the widest point, which is frequently not the base, and including the cap or pump. Send us the actual container if you can — a measurement from a drawing misses flex and applied label thickness, and both decide whether essential oil boxes close cleanly.

More than most brands allow for. Ingredient copy and any warnings compete directly with the design, and adding them late usually forces a reflow. We block the area on the dieline before you commit design time.

Flat and glued along one seam, so they pop open on your packing line. That keeps freight cost down considerably compared with a pre-assembled structure.

A flat 100 units on any format. Most folding cartons in this range are quoted from 100 units upward because unit cost falls sharply above that, but the minimum exists so you can validate a structure first.

3 to 5 business days after artwork approval, plus freight. Folding carton runs with applied finishes can take longer because each finish is a separate pass, and we confirm a firm date in writing with the quote.

Ordered online, essential oil boxes start from $0.30 per unit on our standard build, with free shipping to the US, UK, Canada and Australia. For special sizes, materials or large runs we quote, and for this format the biggest levers are quantity, print route, board grade and how many finishing passes are involved. Finishing passes are the lever buyers most often underestimate: each one is a separate run through the line.

Yes. We can send a plain unprinted sample so you can check the fit and structure, or a printed prototype for color and finish. Sample costs are normally credited against the production order. Ask for the printed prototype rather than the plain sample if the question is finish — soft-touch, foil and deboss all read differently in the hand than on a screen.

Send the current specification or a physical sample and we will quote to match it rather than proposing an alternative you would then have to re-approve internally. A physical sample tells us more than a specification sheet — board caliper and coating are usually described loosely and measured exactly.

All 50 US states, the United Kingdom, Canada and Australia, on the same timeline everywhere: 3 to 5 business days of production after artwork approval, then 5 to 7 business days in transit. Every run is made to order and shipped directly to your address rather than pulled from stock, so you receive current production rather than whatever has been sitting in a warehouse. Freight is costed separately by weight, volume and destination. Tell us at quoting if the delivery point cannot take a pallet, and we will break the consignment into cartons instead.

Every run is cut to your dimensions — there are no stock sizes here. Send the product measurements rather than a box size and we will build the folding carton around them, then send a dieline template you can design onto.

We issue a dieline template sized to your product, prepress checks your artwork against it, and a proof comes back for sign-off. Nothing runs until you approve that proof, and folding cartons then take 3 to 5 business days.