Kraft Boxes with Inserts

Only if boxes are arriving crushed. If they arrive intact with damaged contents, the product is moving inside and a heavier outer changes nothing. A fitted insert solves that case, usually at lower cost.

Yes, and for kraft boxes with inserts we prefer to specify both together. A cavity that holds the contents still often lets us drop a grade on the outer, so the pair can cost less than an over-specified box alone.

Slightly, at the same caliper — recycled fibres are shorter, so the board is a little less stiff and takes on moisture a little faster. Stepping up one caliper generally restores the performance while keeping the recycled claim intact.

We can state the recycled content of the board and supply the mill documentation behind it. We do not issue certifications ourselves, and we would rather give you the underlying evidence than a claim you cannot substantiate.

Board is cheapest and suits light or regular shapes. Foam holds irregular and fragile items better and absorbs shock. Moulded pulp sits between them and is the more recyclable of the cushioning options. Send the item and we will recommend.

A flat 100 units on any format. Most packaging inserts in this range are quoted from 100 units upward because unit cost falls sharply above that, but the minimum exists so you can validate a structure first.

3 to 5 business days after artwork approval, plus freight. Packaging insert runs with applied finishes can take longer because each finish is a separate pass, and we confirm a firm date in writing with the quote.

Prices start from $0.30 per piece for large-volume orders. For this format the biggest levers are quantity, print route, board grade and how many finishing passes are involved. We quote each element separately so you can see where the money is going. An insert often lowers the total rather than raising it, because holding the contents still lets us drop a grade on the outer.

Yes. We can send a plain unprinted sample so you can check the fit and structure, or a printed prototype for colour and finish. Sample costs are normally credited against the production order. On kraft boxes with inserts the thing to check is whether the contents still sit tight once the pack is closed, because movement inside is what causes damage rather than the board grade.

Send the current specification or a physical sample and we will quote to match it rather than proposing an alternative you would then have to re-approve internally. A physical sample tells us more than a specification sheet — board caliper and coating are usually described loosely and measured exactly.

All 50 US states, the United Kingdom, Canada and Australia, on the same timeline everywhere: 3 to 5 business days of production after artwork approval, then 5 to 7 business days in transit. Every run is made to order and shipped directly to your address rather than pulled from stock, so you receive current production rather than whatever has been sitting in a warehouse. Freight is costed separately by weight, volume and destination. Tell us at quoting if the delivery point cannot take a pallet, and we will break the consignment into cartons instead.

Every run is cut to your dimensions — there are no stock sizes here. Send the product measurements rather than a box size and we will build the packaging insert around them, then send a dieline template you can design onto.