Underwear Boxes

For direct despatch, usually not. Parcels get received by neighbours and family, and discretion is a real concern in this category. Put the presentation inside a plain outer.

Very often. Apparel moves in cartons out of habit rather than need, and a flat mailer removes both volume and weight. For non-fragile soft goods the protection is usually sufficient and the freight saving is immediate.

Flat and glued along one seam, so they pop open on your packing line. That keeps freight cost down considerably compared with a pre-assembled structure.

A print-ready PDF or a vector file, with fonts outlined and any raster images at 300 dpi at final size. We supply the dieline to design onto, and prepress checks bleed, safe area and crease clearance before issuing a proof. The dieline we supply carries the crease positions, so keeping type clear of a crease is easier to solve at layout than at proof.

A flat 100 units on any format. Most folding cartons in this range are quoted from 100 units upward because unit cost falls sharply above that, but the minimum exists so you can validate a structure first.

3 to 5 business days after artwork approval, plus freight. Folding carton runs with applied finishes can take longer because each finish is a separate pass, and we confirm a firm date in writing with the quote.

Prices start from $0.30 per piece for large-volume orders. For this format the biggest levers are quantity, print route, board grade and how many finishing passes are involved. We quote each element separately so you can see where the money is going. Finishing passes are the lever buyers most often underestimate: each one is a separate run through the line.

Yes. We can send a plain unprinted sample so you can check the fit and structure, or a printed prototype for colour and finish. Sample costs are normally credited against the production order. A plain sample answers fit and structure; a printed one answers colour. On underwear boxes it is usually fit that is worth checking first.

Send the current specification or a physical sample and we will quote to match it rather than proposing an alternative you would then have to re-approve internally. A physical sample tells us more than a specification sheet — board caliper and coating are usually described loosely and measured exactly.

All 50 US states, the United Kingdom, Canada and Australia, on the same timeline everywhere: 3 to 5 business days of production after artwork approval, then 5 to 7 business days in transit. Every run is made to order and shipped directly to your address rather than pulled from stock, so you receive current production rather than whatever has been sitting in a warehouse. Freight is costed separately by weight, volume and destination. Tell us at quoting if the delivery point cannot take a pallet, and we will break the consignment into cartons instead.

Every run is cut to your dimensions — there are no stock sizes here. Send the product measurements rather than a box size and we will build the folding carton around them, then send a dieline template you can design onto.

We issue a dieline template sized to your product, prepress checks your artwork against it, and a proof comes back for sign-off. Nothing runs until you approve that proof, and folding cartons then take 3 to 5 business days.