Candy Boxes with Inserts

We specify food-contact compliant boards and inks where the pack touches food directly. Tell us whether contact is direct or through a liner for candy boxes with inserts, because it changes which stocks are available to you.

A grease-resistant coating or a greaseproof liner. Untreated board will always strike through eventually with hot, oily food — that is a property of the material rather than a quality fault, and it is inexpensive to design out.

Only if boxes are arriving crushed. If they arrive intact with damaged contents, the product is moving inside and a heavier outer changes nothing. A fitted insert solves that case, usually at lower cost.

Yes, and for candy boxes with inserts we prefer to specify both together. A cavity that holds the contents still often lets us drop a grade on the outer, so the pair can cost less than an over-specified box alone.

Board is cheapest and suits light or regular shapes. Foam holds irregular and fragile items better and absorbs shock. Moulded pulp sits between them and is the more recyclable of the cushioning options. Send the item and we will recommend.

Prices start from $0.30 per piece for large-volume orders. For this format the biggest levers are quantity, print route, board grade and how many finishing passes are involved. We quote each element separately so you can see where the money is going. An insert often lowers the total rather than raising it, because holding the contents still lets us drop a grade on the outer.

Yes. We can send a plain unprinted sample so you can check the fit and structure, or a printed prototype for colour and finish. Sample costs are normally credited against the production order. On candy boxes with inserts the thing to check is whether the contents still sit tight once the pack is closed, because movement inside is what causes damage rather than the board grade.

Send the current specification or a physical sample and we will quote to match it rather than proposing an alternative you would then have to re-approve internally. Tell us the coating on the pack you are matching too. Grease and moisture resistance are not visible in a sample and they change which stocks we can quote.

All 50 US states, the United Kingdom, Canada and Australia, on the same timeline everywhere: 3 to 5 business days of production after artwork approval, then 5 to 7 business days in transit. Every run is made to order and shipped directly to your address rather than pulled from stock, so you receive current production rather than whatever has been sitting in a warehouse. Freight is costed separately by weight, volume and destination. If stock is going into a kitchen or a service counter rather than a warehouse, tell us — case sizes that a single person can lift and store matter more there than pallet efficiency.

Every run is cut to your dimensions — there are no stock sizes here. Send the product measurements rather than a box size and we will build the packaging insert around them, then send a dieline template you can design onto.

We issue a dieline template sized to your product, prepress checks your artwork against it, and a proof comes back for sign-off. Nothing runs until you approve that proof, and packaging inserts then take 3 to 5 business days.

Yes. Once a first run is approved we hold the board, structure, dimensions, print method and finishes against your account, so a reorder references the same specification exactly rather than being re-derived. The board and coating are held together, so a reorder cannot quietly arrive on a stock with different grease resistance.