Mini Gift Bags

Rarely without compromise. A box built to present is not built to survive a carrier network alone. A presentation box inside a plain protective outer usually costs less overall than one box trying to do both.

Small formats are limited by what the die and the gluing line can hold rather than by any policy. Mini Gift Bags sit comfortably within that, but tolerances tighten as size drops, so we recommend a structural sample before print.

It depends on the load, not the look. Twisted paper handles suit light contents; flat paper is stronger for the same cost; cotton rope carries the most and reads as the most premium. Above a few kilos the failure point is usually the bag tearing at the handle, so a reinforced top edge matters as much as the handle itself.

That is set by the paper weight and the top-edge reinforcement together rather than by the handle alone. Tell us the heaviest thing you will put in mini gift bags and we will specify to it rather than to an average.

3 to 5 business days after artwork approval, plus freight. Paper bag runs with applied finishes can take longer because each finish is a separate pass, and we confirm a firm date in writing with the quote.

Prices start from $0.30 per piece for large-volume orders. For this format the biggest levers are quantity, print route, board grade and how many finishing passes are involved. We quote each element separately so you can see where the money is going. Rigid construction is hand-assembled, so labour is a larger share of the unit cost here than it is on a machine-glued carton and quantity discounts flatten out sooner.

Yes. We can send a plain unprinted sample so you can check the fit and structure, or a printed prototype for colour and finish. Sample costs are normally credited against the production order. Ask for the printed prototype rather than the plain sample if the question is finish — soft-touch, foil and deboss all read differently in the hand than on a screen.

Send the current specification or a physical sample and we will quote to match it rather than proposing an alternative you would then have to re-approve internally. Send the physical box rather than a photograph. Wrap stock, corner finish and interior lining are what make a rigid box feel the way it does, and none of them photograph.

All 50 US states, the United Kingdom, Canada and Australia, on the same timeline everywhere: 3 to 5 business days of production after artwork approval, then 5 to 7 business days in transit. Every run is made to order and shipped directly to your address rather than pulled from stock, so you receive current production rather than whatever has been sitting in a warehouse. Freight is costed separately by weight, volume and destination. Small formats consolidate well, so if you are ordering several at once they normally travel as a single consignment rather than being charged separately.

Every run is cut to your dimensions — there are no stock sizes here. Send the product measurements rather than a box size and we will build the paper bag around them, then send a dieline template you can design onto.

We issue a dieline template sized to your product, prepress checks your artwork against it, and a proof comes back for sign-off. Nothing runs until you approve that proof, and paper bags then take 3 to 5 business days.

Yes. Once a first run is approved we hold the board, structure, dimensions, print method and finishes against your account, so a reorder references the same specification exactly rather than being re-derived. It also means a reorder can be priced against a larger quantity without re-opening the specification.