Pet Labels

On offset and flexo we hold the ink formulation, which gives a tight match run to run. Digital has a wider tolerance. If exact consistency across repeat runs matters more than short-run economics, we will quote the litho route.

It matters more than most buyers expect. Adhesive keys differently to glass, coated card, matte plastic and cold or damp surfaces. Tell us the substrate and the application temperature and we will match the adhesive.

Yes. We can send a plain unprinted sample so you can check the fit and structure, or a printed prototype for colour and finish. Sample costs are normally credited against the production order. A plain sample answers fit and structure; a printed one answers colour. On pet labels it is usually fit that is worth checking first.

Send the current specification or a physical sample and we will quote to match it rather than proposing an alternative you would then have to re-approve internally. A physical sample tells us more than a specification sheet — board caliper and coating are usually described loosely and measured exactly.

All 50 US states, the United Kingdom, Canada and Australia, on the same timeline everywhere: 3 to 5 business days of production after artwork approval, then 5 to 7 business days in transit. Every run is made to order and shipped directly to your address rather than pulled from stock, so you receive current production rather than whatever has been sitting in a warehouse. Freight is costed separately by weight, volume and destination. Roll-form work travels well and takes very little space, so freight is rarely the deciding cost on this format even at high quantities.

Every run is cut to your dimensions — there are no stock sizes here. Send the product measurements rather than a box size and we will build the label around them, then send a dieline template you can design onto.

We issue a dieline template sized to your product, prepress checks your artwork against it, and a proof comes back for sign-off. Nothing runs until you approve that proof, and labels then take 3 to 5 business days.

Yes. Once a first run is approved we hold the board, structure, dimensions, print method and finishes against your account, so a reorder references the same specification exactly rather than being re-derived. That includes the ink formulation, which is what keeps a brand colour consistent between runs rather than drifting a shade each time.

Recycled grades are available across most of the substrates we run for labels. Recycled content, kerbside recyclability and certified compostability are three different claims though, so tell us which one you intend to print.

A print-ready PDF or a vector file, with fonts outlined and any raster images at 300 dpi at final size. We supply the dieline to design onto, and prepress checks bleed, safe area and crease clearance before issuing a proof. On a die-cut face, keep live copy clear of the cut edge — a small amount of movement on the die is normal and copy set to the edge will lose it on some of the run.

A flat 100 units on any format. Most labels in this range are quoted from 100 units upward because unit cost falls sharply above that, but the minimum exists so you can validate a structure first.

3 to 5 business days after artwork approval, plus freight. Label runs with applied finishes can take longer because each finish is a separate pass, and we confirm a firm date in writing with the quote.