Cardboard Display Boxes

Along a designed perforation, which is the hardest part of the structure to get right. Too weak and it fails in transit; too strong and store staff tear it badly. It is decided at dieline stage, and we recommend a sample before committing.

If you are supplying a grocery chain, almost certainly. Case dimensions, pallet pattern and barcode placement are usually published and non-negotiable. Send the requirement and we will design inward from it.

That is a structural calculation rather than a hope. Send the weight of a full facing and we will grade the board and add reinforcement where the load actually sits, which is usually the base and the front lip.

We issue a dieline template sized to your product, prepress checks your artwork against it, and a proof comes back for sign-off. Nothing runs until you approve that proof, and display boxes then take 3 to 5 business days.

Yes. Once a first run is approved we hold the board, structure, dimensions, print method and finishes against your account, so a reorder references the same specification exactly rather than being re-derived. It also means a reorder can be priced against a larger quantity without re-opening the specification.

Recycled grades are available across most of the substrates we run for display boxes. Recycled content, kerbside recyclability and certified compostability are three different claims though, so tell us which one you intend to print.

A print-ready PDF or a vector file, with fonts outlined and any raster images at 300 dpi at final size. We supply the dieline to design onto, and prepress checks bleed, safe area and crease clearance before issuing a proof. The dieline we supply carries the crease positions, so keeping type clear of a crease is easier to solve at layout than at proof.

A flat 100 units on any format. Most display boxes in this range are quoted from 100 units upward because unit cost falls sharply above that, but the minimum exists so you can validate a structure first.

3 to 5 business days after artwork approval, plus freight. Display box runs with applied finishes can take longer because each finish is a separate pass, and we confirm a firm date in writing with the quote.

Prices start from $0.30 per piece for large-volume orders. For this format the biggest levers are quantity, print route, board grade and how many finishing passes are involved. We quote each element separately so you can see where the money is going. Finishing passes are the lever buyers most often underestimate: each one is a separate run through the line.

Yes. We can send a plain unprinted sample so you can check the fit and structure, or a printed prototype for colour and finish. Sample costs are normally credited against the production order. Load a sample to a full facing before approving it. A display that holds its shape empty can still bow under stock.

Send the current specification or a physical sample and we will quote to match it rather than proposing an alternative you would then have to re-approve internally. A physical sample tells us more than a specification sheet — board caliper and coating are usually described loosely and measured exactly.