Retail Display Boxes

By feeling a physical sample. It is the one part of a display case that cannot be judged from a drawing — too weak and it opens in transit, too strong and staff tear it badly.

Along a designed perforation, which is the hardest part of the structure to get right. Too weak and it fails in transit; too strong and store staff tear it badly. It is decided at dieline stage, and we recommend a sample before committing.

If you are supplying a grocery chain, almost certainly. Case dimensions, pallet pattern and barcode placement are usually published and non-negotiable. Send the requirement and we will design inward from it.

That is a structural calculation rather than a hope. Send the weight of a full facing and we will grade the board and add reinforcement where the load actually sits, which is usually the base and the front lip.

All 50 US states, the United Kingdom, Canada and Australia, on the same timeline everywhere: 3 to 5 business days of production after artwork approval, then 5 to 7 business days in transit. Every run is made to order and shipped directly to your address rather than pulled from stock, so you receive current production rather than whatever has been sitting in a warehouse. Freight is costed separately by weight, volume and destination. Tell us at quoting if the delivery point cannot take a pallet, and we will break the consignment into cartons instead.

Every run is cut to your dimensions — there are no stock sizes here. Send the product measurements rather than a box size and we will build the display box around them, then send a dieline template you can design onto.

We issue a dieline template sized to your product, prepress checks your artwork against it, and a proof comes back for sign-off. Nothing runs until you approve that proof, and display boxes then take 3 to 5 business days.

Yes. Once a first run is approved we hold the board, structure, dimensions, print method and finishes against your account, so a reorder references the same specification exactly rather than being re-derived. It also means a reorder can be priced against a larger quantity without re-opening the specification.

Recycled grades are available across most of the substrates we run for display boxes. Recycled content, kerbside recyclability and certified compostability are three different claims though, so tell us which one you intend to print.

A print-ready PDF or a vector file, with fonts outlined and any raster images at 300 dpi at final size. We supply the dieline to design onto, and prepress checks bleed, safe area and crease clearance before issuing a proof. The dieline we supply carries the crease positions, so keeping type clear of a crease is easier to solve at layout than at proof.

A flat 100 units on any format. Most display boxes in this range are quoted from 100 units upward because unit cost falls sharply above that, but the minimum exists so you can validate a structure first.

3 to 5 business days after artwork approval, plus freight. Display box runs with applied finishes can take longer because each finish is a separate pass, and we confirm a firm date in writing with the quote.